LED Modeling Lamp — Epoxy Modeling Lamp

There are usually several methods for LED modeling lights: one is to weld the iron frame, then paint, and then tie the Christmas light strings to the iron frame, and some outlines can be tied with rainbow tubes or flexible light strips; one is to directly open the mold and use the mold Pour out the shape, it can be mass-produced, saving time and labor costs. There are the above types of modeling lamps, but the effects of the two methods are also different.
Directly tied lights can also be used directly, or can be glued, so that it looks brighter and the effect will be more beautiful. Modeling lights that are directly tied to lights are also often made into flat-shaped lights, which we also call pattern lights. Pattern lights are relatively simple, and they are also very popular when they are directly hung on the wall. Many people have given it an artistic name—— Lighting painting. The lighting effect of directly tying the light string is OK, but it is not so beautiful when the lights are not on, so the glue-shaped lights are more popular with the public, and the lighting and non-lighting are very beautiful. In the last two years, however, glowing fiberglass modeling lights have emerged that are so much more realistic than the glue-drop shape lights of yore, you'd think it was real.
The iron frames usually used for modeling lamps have square tubes and round tubes, with different weights and bending degrees, and you can actually choose according to your needs. However, the modeling lamp with welded iron frame has a larger load-bearing capacity, which can reach more than 300 catties. It is not recommended to sit directly on the Epoxy modeling lamp using the mold, because the resin has a weak bearing capacity. Epoxy glue on the surface of the modeling lamp is generally made of acrylic or ABS material. The acrylic modeling lamp is easy to break, but the cost is relatively low, so ABS soft material is preferred, and it is not easy to break. When actually using it, you can refer to the use environment and choose according to the cost budget. use.
In addition, when it comes to luminous fiberglass modeling lamps, it is usually made of luminous animal modeling lamps, luminous plant modeling lamps, luminous stone modeling lamps and other lamps. Luminous fiberglass modeling lamps are also widely used, and their clear outlines make people prefer them.
Summarized the above three iron frame modeling lamps, epoxy molding lamps, and luminous fiberglass modeling lamps, which one do you prefer?