Pay attention to five maintenance rules after lamp decoration

Everyone has a different understanding of home. How to decorate the most perfect home with limited funds? In home decoration, many owners are very concerned about the decoration cost. Therefore, planning must be done before decoration. Only by doing so can cost be reduced. If you compare the room without decoration to the canvas, the decoration to a painting process, and the lighting is the finishing touch of this home painting.
However, if proper cleaning and maintenance are not carried out, even high-end lighting will soon fade. Like other furniture, lamps and lanterns also need to be cleaned and maintained regularly to maintain the brightness of lamps and prolong the life of lamps. The lampshade is getting dim due to dust. If it is not treated in time, the brightness will be reduced by about 30% on average every year. Therefore, it is particularly important to clean the lampshade and lamp tube or bulb regularly.
Here are five maintenance rules for lamps after decoration:
1. Don't rush to install the lamp after buying it back. Read the lamp signs and installation instructions carefully, and then install and use the lamps according to the instructions, otherwise there will be danger.
2. Replace the aging lamp tube in time according to the light source parameters provided by the sign. If both ends of the lamp tube are red, the lamp tube is black or has dark shadow, and the lamp tube does not light up, the lamp tube should be replaced in time to prevent unsafe phenomena such as ballast burning out.
3. During cleaning and maintenance, attention should be paid not to change the structure of the lamp, nor to replace the parts of the lamp casually. After cleaning and maintenance, the lamp should be installed as it is, without missing or installing the parts of the lamp by mistake.
4. In order to prolong the service life of lamps, the maintenance should be strengthened. The lamp tubes in the room should be wiped with dry cloth frequently, and attention should be paid to prevent moisture intrusion, so as to avoid corrosion damage or electric leakage and short circuit after a long time; Lamps installed in toilets and bathrooms must be equipped with moisture-proof lampshades, otherwise the service life will be greatly shortened; The lamp installed in the kitchen should pay special attention to the prevention of oil smoke, because the accumulation of oil dirt will affect the illumination of the lamp; The light shade has good light transmittance, but it is easy to stick to dust, so be diligent in wiping to avoid affecting the light penetration; If the lamp is non-metallic, it can be wiped with wet cloth to avoid dust accumulation and hinder the lighting effect.
5. When using the lamp, try not to switch frequently, because the current through the filament is greater than the current in normal operation at the moment of frequent start, which makes the filament temperature rise sharply and accelerate sublimation, thus greatly reducing its service life. Therefore, try to reduce the switch of the lamp.
Special reminder:
Dampness can easily lead to rust and paint loss, and shorten the service life of lamps. Therefore, moisture-proof is the key to lighting maintenance, especially the lamps in the bathroom and kitchen should be installed with moisture-proof lampshade to prevent moisture intrusion, corrosion damage or electric leakage and short circuit.
Do not wash the lamp with water. Clean it with a dry rag. If you accidentally touch the water, try to dry them. After turning on the lamp, do not wipe it with a wet rag immediately.