Installation and maintenance of LED simulation tree lights

The blades and LED particle lights are fixed on each branch. The construction party only needs to fix them according to the connecting groove of the product itself, and then connect the branches with the corresponding power cord plug connectors on the main pole, which is strong and convenient. Compared with other landscape lights, the maintenance of LED tree lights is simpler and more convenient. You only need to remove the damaged light strings and install new light strings. Specific steps are as follows:
1. The tree body is fixed.
2. The branch is installed and fixed, and connected to the plug.
3. Insert the branch with flowers into the branch and fix it, and connect the plug.
4. Open and bend the branches at will.
5. Turn off the main power supply and connect the power cord (the low-voltage one needs to be connected to the transformer first, and the flashing one needs to be connected to the controller first), and turn on the power to test the light.